Every Country Log Cabin standard package comes complete with Log & Timber, Weather Tight and Finish Materials as detailed below.
Log and Timber Components
- Kiln-dried 6x8 collar ties
Kiln- dried 8" round collar ties - Kiln-dried 6x8 loft ties
Kiln-dried 8" round loft ties - Kiln-dried 6x8 exposed ceiling beams
Kiln-dried 8" round exposed ceiling beams - Glu-lam ridge beams (as required)
- Kiln-dried 6x8 porch header
Kiln-dried 8" round porch header - Butylog sealant tape
- Caulking/gasket/chinking
- 12" lag bolts
- Pre-cut splines
- 8" polebarn nails
- Steel gusset plates, bolts, nuts, washers
- Blueprints
- Construction Manual and DVD
- Delivery Video
- Kiln-dried, precut, predrilled log walls (Eastern White Pine)
- Kiln-dried, precut, predrilled log gables/dormers (Eastern White Pine)
- Kiln-dried log siding for exterior framed walls, gables, dormers, garages (Eastern White Pine)
- Kiln-dried log siding skirt board (Eastern White Pine)
- Kiln-dried log corner extensions (Eastern White Pine)
- 4x10 perimeter box
- Kiln-dried 6x8 loft joists
- Kiln-dried 8" round loft joists
- 8x12 loft beams
- Glu-lam loft beams (as required)
- Kiln-dried 6x6/8x8 corner posts
- Kiln-dried 6x8/8x8/8" round support posts
- Kiln-dried 6x8 rafters, precut
- Kiln-dried 6x8 timber trusses/purlins, precut
- Kiln-dried 6x8 chimney/skylight framing members
Weather-Tight Components
- R-38 rigid foam insulation and 2x furring strips for 6x8 rafter or 6x8 timber truss roof system
- 2x fascia
- 1x sub-fascia for 6x8 rafter or 6x8 timber truss roof system
- 1/2" OSB roof sheathing with H-clips
- 30lb. felt paper
- Ice and water shield
- 30 yr. Architectural shingles
- Drip edge, flashing
- Ridge vent, strip vent
- Porch materials:
- PT 6x6 porch posts
- PT 6x6 porch post braces
- PT 8" round porch posts
- PT 2x floor joists, headers
- Metal joist hangers
- 2x rafters, 2x ceiling joists
- Nail/screw package
- R-38 rigid foam insulation and 2x furring strips for 6x8 rafter or 6x8 timber truss roof system
- 2x fascia
- 1x sub-fascia for 6x8 rafter or 6x8 timber truss roof system
- 1/2" OSB roof sheathing with H-clips
- 30lb. felt paper
- Ice and water shield
- 30 yr. Architectural shingles
- Drip edge, flashing
- Ridge vent, strip vent
- Porch materials:
- PT 6x6 porch posts
- PT 6x6 porch post braces
- PT 8" round porch posts
- PT 2x floor joists, headers
- Metal joist hangers
- 2x rafters, 2x ceiling joists
- Nail/screw package
- All first-floor materials:
- PT 2x sill plate and sill seal
- (4) 2x12 girder beams
- PT 6x6 girder support posts
- 2x10 floor joists
- Metal joist bridging
- Metal joist hangers
- Construction adhesive
- 3/4" OSB T&G subfloor sheathing
- Andersen® windows and exterior doors with hardware, screens and grilles
- Therma-Tru® exterior doors with hardware
- 2x window and door bucks
- Exterior window and door trim
- 2x load bearing partition framing
- 2x framing for exterior walls, gables, dormers, garages
- 1/2" OSB wall sheathing for framed exterior walls, gables, dormers, garages
- 15lb. felt paper for framed exterior walls, gables, dormers, garages
- Pre-manufactured roof and gable-end trusses
- 2x12 rafters
- 2x ladder rake
- 1" T&G pine soffit paneling
- 1" T&G pine ceiling paneling and 15lb. felt paper below rigid insulation of 6x8 rafter or 6x8 timber truss roof system
Finish Materials Components
- Stair materials:
- Basement: 2x12 stringers, 2x treads
- Finish: 2x12 stringers, 2x treads, 1x pine risers
- Exposed: 4x12 pne stringers, 4x pine treads
- Spiral: 4x12 pine treads, 4x6 posts with 1" rope handrail, pre-cut (will not meet IRC)
- Log: log stringers, 1/2" log treads, pre-cut (will not meet IRC)
- Deck/Balcony materials:
- PT 6x6 posts
- PT 2x4 railings
- PT 2x2 balusters
- PT 8" round posts
- PT 4 1/2" round railing
- PT 2" round balusters
- PT 5/4 flooring
- PT 2x floor joists, headers
- Metal joist hangers
- Porch materials:
- 1" T&G pine ceiling paneling
- PT 5/4 flooring
- PT 2x4 railings
- PT 2x2 balusters
- PT 4 1/2" round railing
- PT 2" round balusters
- Exterior preservative, stain, insecticide
- Nail/screw package
- 2x non-load bearing partition framing
- 1" T&G pine interior wall and ceiling paneling
- 1" T&G pine paneling for interior side of framed gable/dormer walls
- R-19 fiberglass insulation for exterior framed gable/dormer walls
- Composition floor:
- 1" T&G pine subfloor(first layer)
- 3/4" OSB T&G subfloor (second layer)
- 2x6 pine T&G loft flooring
- Loft/stair rail materials:
- 4x4 posts
- 2x4 railing
- 2x2 balusters
- 8" round posts
- 4 1/2" round railing
- 2" round balusters
- Solid wood, raised panel interior doors with hardware
- Solid wood, raised panel or louvered bi-fold doors with hardware
- Interior pine trim for windows, interior and exterior doors
- Interior window sills
- 1x4 pine baseboard
- R-32 fiberglass insulation for 2x rafter roof, pre-manufactured truss roof systems
- Insulation baffle board and plastic vapor barrier for 2x rafter roof, pre-manufactured truss roof system